When the trolley enters the rear of the sintering machine, it will start to level after passing through the center of the star wheel.

Because the welding platform is provided with ribs, the structural strength of the cast iron mold can be improved, which is beneficial to prevent excessive internal stress and cracking.

T-slot bent plates are used for component inspection and clamping in machining. There are many types of T-slot bent plates, such as cast iron bent plates, right-angle bent plates, ordinary bent plates, spliced bent plates, and right-angle bent plates.

1. Lay the cast iron platform flat on the ground, adjust the stability of the four corners, and fine-tune the movable foot until it is stable.

The assembly plate, also called the fitter assembly platform, is mainly used for assembly—that is, the assembly of related machinery and equipment and the test before putting it into use; the welding platform is mainly for welding, which is the welding platform in the process of mechanical production.Including marking plate, inspection plate,cast iron platform.

1. When inspecting parts on the machine tool, the inspection can only be carried out after the parts have stopped. Otherwise, the measuring surface of the measuring tool will not only wear out prematurely and lose accuracy, but also cause accidents.