1. When placing the workpiece on the platform, it should be handled with care to prevent the surface of the platform from being hit. Once the surface of the plate is hit by the workpiece or other objects, the bumped part should be restored immediately.

　　

2. Never do any work that requires hammering on the surface of the cast iron T slotted plates.　　

 

3. After the tablet is used up, it should be wiped clean. Anti-rust oil should be applied if not used for a long time to prevent corrosion.　

　

4. The cast iron T slotted plates should be used evenly throughout the platform as far as possible. Avoid local grinding and dents.　

　

5. Always keep the plate clean to prevent the platform surface from being damaged by iron filings, sand and other impurities.　　

 

6. In order to prevent harmful deformation of the cast iron T slotted plates, the support should be supported at the main fulcrum when the platform is installed. When supporting, try to adjust the working surface of the platform to the horizontal plane.

　　

7. In order to prevent the platform from deforming, after the inspection or marking is completed, the workpiece should be lifted down, and it should not be placed on the platform for a long time.

　　

8. After use, wipe the working surface of the plate in time, and then apply a layer of anti-rust oil. If you don't use it for a long time, apply a layer of butter as much as possible and then spread a layer of white paper.　

　

9. Try to use a special cover made of wooden boards. When the platform is not used, cover the platform with a cover. Water dripping on the platform is strictly prohibited.

　　

10. Periodic verification shall be carried out for the tablet, and the verification period shall be determined according to the specific conditions of use, generally one year.

 

To know more about cast iron T slotted plates, pls visit our web www.jgmtcasting.com.